Laboratory Equipment

Product Details:

Digital COD Digester is suitable for COD method for monitoring waste water influent and effluent, industrial process water and more.This instrument is used by Pollution control LabsDigital COD Digesters apparatus model 2015 D is a solid block heated unit with provision for 15 samples at a time in 40mm diaReaction Vessel. All the sample are heated at 150 degC with in + 1% accuracy with utmost uniformity of temperature.

Features:

• Compact in Construction
• No water circulation
• Standard APHA method
• Proven performance

Product Details:

Features :

• Digital speed indicator
• Soft start & memory of last used program in case of power failure.
• Variable stirring capacity
• Preset digital timer (0-99 min)
• Soft touch keypad for Speed & Time PMDC motor

Product Details:

Apart from performing the functions of the regular laminar airflow equipment, it also protects the operator from the toxic / pathogenic contamination created during the research activities and also protects the atmosphere from such contaminations. For example, if an operator performs research on HIV virus or any other very hazardous /toxic materials, the operator needs to protect from the possible contamination /infection due to the virus hehandles in his laboratory. A bio-safe hood does the job of protecting the not only the operators but also theenvironment by removing those viruses from the air-stream by means of High Efficiency Particulate Air Filters.

The biological safety cabinets (BSCs), enclosed containers and other engineering controls designed to remove orminimize exposures to hazardous biological materials. The biological safety cabinet (BSC) is the principaldevice used to provide containment of infectious splashes or aerosols generated by many microbiological procedures. Three types of biological safety cabinets (Class I, Class II (A1, A2, B1, & B2 ), Class III used in microbiological laboratories application. Open-fronted Class I and Class II.biological safety cabinets are primary barriers which offers significant levels of protection to laboratory personnel and to the safety cabinet also provides protection from external contamination of the materials (e.g., Cell culture, microbiological stock & drug formulations, or when manipulating potential infectious materials) being manipulated inside the cabinet. The gas-tight Class III Biological Safety Cabinet provides the highest attainable level of protection to personnel and the environment.

Product Details:

Laboratory Hot Air Oven is sturdy, with double walled construction. Inner chamber is made of Stainless Steel 304/316.Outer chamber is made of Mild Steel Sheet duly pretreated in seven tanks process for surface treatment & are finished with durable Powder Coated Paint.(Optional Inner & Outer Body made of Stainless Steel) 75 mm gap between the walls is filled with special grade glass wool for proper insulation and to avoid heat losses. Inner chamber is fabricated with ribs to adjust shelves to any convenient height. 

Product Details:

Capacity Available:

• 5 ml - 500 ml

Product Details:

Hot plates

Product Details:

Additional Information:

• Delivery Time: 15day

Product Details:

Technical Specifications:

• Inner muffle of Ceramic with high grade ceramic instillation
• Door insulation of HFK briks
• Heating element are made from kanthal A1 Wire
• A Uniform distribution through all 4 sides with kentahl wire
• Equipped with digital temp. Controller cum indicator fitted on top side of the unit with indicating lamps & switches
• A special type of thermocouple fuse for safety to avoid over heating

Optional Accessories:

• Digital Timer
• Solid state fuses for extra safety
• PID Controller with printer interface

Product Details:

Hot Air Seed Dryer that help in removing the excess moisture from the seeds and ensuring that they can be stored for longer periods without the fear of fungus setting in or rotting. This processing machine is available in various sizes, which you can choose from based on you specific requirements.

Construction Seed Dryer is sturdy, with double walled construction. Inner chamber is made of Stainless Steel. Outerchamber is made of Mild Steel Sheet duly pretreated in seven tanks process for surface treatment & are finished with durablePowder Coated Paint.(Optional Inner & Outer Body made of Stainless Steel) 75 mm gap between the walls is filled withspecial grade glass wool for proper insulation and to avoid heat losses. Supplied with Aluminum Trays Insulated door is fittedwith heavy hinges with Lash Handle door closing device.

Ventilation :– Air ventilator ports provided on both sides at top to ventilate, gases and fumes if any.

Control Panel :– The equipment is provided with a panel having a Digital Controller ON/OFF switch, two pilot indication lightsand provision for fixing the TIMER (Optional).

Product Details:

Construction : LAF Made of MS Powder Coated /Ply-Board with Melamine lamination , Work Table made of SS304 and Side panels of thick Transparent Acrylic Sheet.

Air Flow And Filtration:
LAF Principal involves Double Filtration of Air. Atmospheric air is drawn Through Pre filter and made to pass through highly effective Mini plate HEPA(high Efficiency Particular air)Filters having efficiency rating as high as 99.99% with cold DOP and 99.97% with hot DOP, thus retaining all airborne particle of size 0.3 Micron and larger .Double filtered air blows in laminar air flow through the work Table at designed Velocity of 90ft.min.+/- 20%, These are designed to meet class 100 requirements and as per US standard 209E, With in work Zone.

Blower motor Assembly:Duly Balanced, Direct Drive motor blower unit sized to provide adequate air flow volume over the entire surface of heap filter . Noise level lower than 65db “A” scale and vibration less than 2.5um rms.

Lighting:- Work area properly illuminated by diffused , glare free fluorescent light providing 800 LUX

U . V. Light:- Built in UV Germicidal light.

Manometer:- Fitted with manometer for static Pressure

Product Details:

Product Details:

Product Details:

Heating mantle

Product Details:

Product Details:

Product Details:

Whatman filter papers

Product Details:

Product Details:

Magnetic stirrers With Hot Plates

Product Details:

Jar Test apparatus

Product Details:

Product Details:

Product Details:

Fume Hoods are recommended for exhaust from the hood working area, of gases, vapor, toxic particles, odor to improve workingenvironment of people who regularly handle toxic substances. These reduce personal exposures and odor level in the laboratory. Theseare designed to exhaust toxic, or otherwise harmful vapors etc., for protecting laboratory personnel & equipments. A motor-blower exhaust system (Optional) generates negative pressure within the hood, extracting the contaminated air from the work area and expelling it into the atmosphere and preventing the fumes from escaping into the room. These are recommended for various laboratories like Bio-Chemistry,Pharmaceutical units, printed circuit etching/cleaning etc. These are capable or handling corrosive fumes of sulphuric and hydrochloric acids etc. If work-area walls are lead-lined (Optional), it can be effectively used for Radio-Isotopic applications.Construction The main body of the fumes hood is made of FRP. The work surface (Worktable) is of Granite A small S.S. Sink, water tap and water outlet provided. A sliding door made of acrylic, moves vertically up/down with counter balanced weight operated by steel rope.Hope is provided with fluorescent light for easy working in the chamber. A metal cladsocket and gas cock is also provided in the chamber. The control panel is fitted withon/off toggle switches for mains, motor-blower and tube light and mains indicator.

The main body of the fumes hood is made of FRP. The work surface (Worktable) is ofGranite A small S.S. Sink, water tap and water outlet provided. A sliding door made ofacrylic, moves vertically up/down with counter balanced weight operated by steel rope.Hope is provided with fluorescent light for easy working in the chamber. A metal cladsocket and gas cock is also provided in the chamber. The control panel is fitted withon/off toggle switches for mains, motor-blower and tube light and mains indicator.

Optional Accessories

• Complete exhaust system suitable for 8' duct and installation.
• Fume Duct -PVC.
• Lead-Lining on work are a walls for radio isotope application.
• Special exhaust system (for duct above 10 ft.)
• F.C. mounting base with storage space and door.
• Acid resistance ceramic tiles work surface (Work Table)

Product Details:

Product Details:

Product Details:

Product Details:

Product Details:

Product Details:

Rotary shaker

Additional Information:

• Delivery Time: Ready

Product Details:

Product Details:

Accelerated curing tank